How To Shrink A Swimsuit?

The Ultimate Guide for All Types of Fabrics

Summertime is finally here, and that means it's time to break out the swimsuits! But sometimes, even after we've carefully chosen the perfect swimsuit, it can still be a little too big. If this is the case, don't worry—there are ways to shrink your swimsuit, so it fits perfectly.

Swimwear Fabrics

Swimwear Fabrics

We all know how frustrating it is to buy a new swimsuit, only to find out that it's too big. But don't worry, there are ways to shrink a swimsuit so that it fits perfectly!

In this blog post, we'll show you how to shrink a swimsuit made of different types of fabrics, including Lycra, polyester, nylon, cotton cloth, and more. We'll also give you some tips on how to avoid damaging your swimsuit while shrinking it.

So, whether you accidentally bought a swimsuit that's too big or your bathing suit has simply become loose over time, follow these steps to shrink it down to the perfect size.

Lycra SwimsuitsLycra is a type of synthetic fiber that is often used in swimwear because it is stretchy and comfortable. While it is possible to shrink a Lycra swimsuit, you should be careful not to damage the fabric.

Step One: Fill a sink or bathtub with lukewarm water and add 1/4 cup of table salt.

First, you'll need to fill a sink or bathtub with lukewarm water and mild laundry detergent. Then, add 1/4 cup of table salt to the water and stir it until the salt is dissolved.

Step Two: Submerge your Lycra swimsuit in the saline solution and let it soak for 10-15 minutes.

Next, you'll need to submerge your Lycra bathing suits in the saline solution and let it soak for 10-15 minutes.

Step Three: Rinse your swimsuit in lukewarm water and then gently wring it out.

After 10-15 minutes, you should remove your swimsuit from the saline solution and rinse it in lukewarm water. Once it's been rinsed, you can gently wring it out to remove any excess water.

Step Four: Place your swimsuit in the dryer on the lowest heat setting and let it tumble dry for 10-15 minutes.

Once your swimsuit is no longer wet, you can place it in the clothes dryer on the low heat setting. You should let it tumble dry for 10-15 minutes or until it completes the drying process.

  1. Polyester Swimsuits

Polyester is a type of synthetic fabric that is often used in swimwear because it is durable and quick-drying. While polyester is not as easy to shrink as Lycra or spandex, it is possible to do so with the right methods.

Step One: Fill a sink or tub with lukewarm water and add 1/2 cup of white vinegar.

First, fill a sink or bathtub with lukewarm water and mild detergent. Then, add 1/2 cup of white vinegar to the water. Vinegar is a natural fabric softener and will help to shrink your polyester swimsuit.

Step Two: Submerge your swimsuit in the vinegar solution and let it soak for 30 minutes.

After you have added the vinegar to the water, submerge your polyester swimsuit in the solution. Let the swimsuit soak for at least 30 minutes to allow the fabric to absorb the vinegar.

Step Three: Remove your swimsuit from the vinegar solution and rinse it thoroughly with cold water.

Once your swimsuit has finished soaking, remove it from the vinegar solution and rinse it thoroughly with cold water. Be sure to rinse away all of the vinegar, as this can cause the swimsuit to become stiff.

Step Four: Wash your swimsuit in a washing machine on the delicate cycle using cold water.

Wash your swimsuit in a washing machine on the delicate cycle using cold water. This will help to further shrink the fabric and remove any residual vinegar.

Step Five: Hang your swimsuit up to dry or lay it flat on a towel to air dry.

Hang your swimsuit up to dry, or lay it flat on a towel to air dry. Once your swimsuit is completely dry, it should be smaller than it was before.

  1. Spandex Swimsuits

Ocean One Piece

 

Spandex is a type of synthetic fabric that is often used in swimwear because it is stretchy and comfortable. While spandex is not as easy to shrink as Lycra or polyester, it is possible to do so with the right methods.

Step One: Fill a sink or large basin with cool water and add 1/4 cup of table salt.

First, you will need to fill a sink or basin with cool water. Then, add 1/4 cup of table salt to the water and stir it until the salt has dissolved.

Step Two: Submerge your swimsuit in the water and let it soak for 30 minutes.

After the salt has dissolved, you can go ahead and submerge your swimsuit in the water. Make sure that the entire swimsuit is submerged, and then let it soak for 30 minutes.

Step Three: Remove your swimsuit from the water and wring it out.

After 30 minutes have passed, you can remove your swimsuit from the water and wring it out. Be sure to wring it out well so that it is not dripping wet.

Step Four: Place your swimsuit in the dryer on the lowest setting and let it tumble dry for 10 minutes.

After you have wrung out your swimsuit, you can place it in the dryer on the lowest setting. Let the tumble drying suit for 10 minutes, and then check on it to see if it has shrunk.

Step Five: If your swimsuit is still too big, repeat steps three through five until it is the right size.

If your swimsuit is still too big after following the above steps, you can repeat them until your swimsuit shrinks to the right size. Just be sure not to leave it in the dryer for too long, or you may damage the fabric.

  1. Nylon Swimsuits

Nylon Swimwear

Nylon Swimsuit Fabric

Nylon is another type of synthetic fabric that is often used in swimwear. Like spandex, nylon is also stretchy and comfortable. However, nylon is a bit easier to shrink than spandex.

Step One: Fill a sink or basin with lukewarm water and add 1/4 cup of table salt.

To help the salt dissolve faster, you can also add a few drops of dishwashing liquid.

Step Two: Submerge your nylon swimsuit in the water and let it soak for about 15 minutes.

After 15 minutes, remove the swimsuit from the water and gently squeeze out the excess water.

Step Three: Place the damp bathing suit in a dryer set on the lowest heat setting.

Check the swimsuit every few minutes to make sure it isn't shrinking too much. Once it has reached your desired size, remove it from the dryer and let it cool.

Step Four: Hang the swimsuit up to dry completely.

It's important to let the swimsuit air dry completely before wearing it again.

Other Methods to Shrink a Bathing Suit

There are a few other methods that you can try if the above methods don't work for you.

Gene Snake Bikini Set

Bora Bora Black

  1. Boiling Water

One method is to boil a pot of water and then carefully lower your swimsuit into the water using a pair of tongs. Let it soak for about 15 minutes, and then remove it from the hot water. Squeeze out the excess water and then place the swimsuit in the dryer on the lowest heat setting. Check it every few minutes to make sure it isn't shrinking too much.

  1. Hot Iron

Another method is to place your swimsuit on an ironing board and then cover it with a thin towel. Next, take a hot iron and carefully run it over the towel. Be sure not to leave the iron in one spot for too long, or you could damage the fabric. After a few minutes, check to see if the swimsuit has shrunk. Suppose it hasn't. Repeat the process until it reaches your desired size.

  1. Hair Dryer

If you don't have an iron, you can try using a hairdryer. Just be sure not to hold it too close to the fabric, or you could damage it. Start by holding the hairdryer about six inches away from the swimsuit and then moving it closer if needed.

  1. Hot Sun

Another method is to place your swimsuit in direct sunlight. The heat from the sun will help to shrink the fabric. Just be sure to check on it every few minutes so that it doesn't shrink too much.

  1. Hot Car

You can also try leaving your swimsuit in a hot car for a few hours. The heat from the car will help to shrink the fabric. Just be sure to check on it every so often to make sure it doesn't get too hot.

  1. Hot Oven

Another method is to place your swimsuit in a preheated oven set to the lowest temperature. Be sure to check on it every few minutes so that it doesn't get too hot. Once it has reached your desired size, remove it from the oven and let it cool.

  1. Hot Air Balloon

If you have access to a hot air balloon, you can try taking your swimsuit for a ride. The heat from the balloon will help to shrink the fabric. Just be sure to check on it every so often to make sure it doesn't get too hot.

Tips to Keep in Mind

Bora Bora Brown 

  • If you don't have a dryer, you can also shrink your nylon swimsuit by hanging it in the sun.
  • To prevent your swimsuit from shrinking further, be sure to wash it in cold water and hang it up to dry instead of tumble drying it.
  • If your swimsuit is made of a mix of nylon and spandex, it will be easier to shrink than if it were made entirely of nylon.
  • If your nylon swimsuit is brand new, it may have been treated with chemicals that make it resistant to shrinking. In this case, you may not be able to shrink it at all.
  • If you're trying to shrink a nylon swimsuit that is already small, be very careful not to over shrinking it.
  • Never try to shrink a nylon swimsuit that is too large for you. It's better to buy a new one that fits properly.

How to Make The Shrinking Process Efficient?

To make the shrinking process as efficient as possible is important to choose:

  • The right type of swimsuit fabric: spandex, nylon, or a mix of both or cotton blends in some cases. So make sure you know what your swimsuit is made of before you start.
  • The right method: boiling, saltwater, or the dryer. Each type of fabric responds better to certain methods, so choose the one that will work best for your fabric.
  • The right amount of time: 15 minutes for nylon and 30 minutes for spandex. If you leave your swimsuit in the water or the dryer for too long, you run the risk of damaging the fabric.
  • The right size: too big or too small. If your swimsuit is too small, you risk over shrinking it. If it's too big, you may not be able to shrink it at all.
  • The right environment: a sink or basin filled with lukewarm water for boiling, a sink or basin filled with cold water and salt for saltwater, or a dryer set on the lowest heat setting for the dryer.

With these tips in mind, you should be able to shrink your swimsuit with ease. Just be sure to take your time and be careful not to damage the fabric.

Final Thoughts

Shrinking a swimsuit is a great way to get a better fit. It's also a good way to save money if you've accidentally bought a swimsuit that's too big. Just be sure to follow the instructions 

 

If you liked this blog post remember to share with your friends!  

With love, the Ishine team.